New Product: X-TEND™ Tracker Bar Extension

01/08/2018

New Product: X-TEND™ Tracker Bar Extension
At a fraction of the cost of similar systems, and with minimal effort to install, the new X-TEND™ tracker bar extension was designed to prevent scuffs and marring on the back of the cab from swinging cables, by extending the cables out and away from the back of the tractor. With this type of cable support, the tracker spring kit and cables are extended out an additional 8 inches from the tracker bar, with a total of 12 inches away from the back of the cab. The X-TEND™ does not require any mounting hardware, and is easy to install by attaching the mounting bracket onto the tracker bar and then resting the nylon support bracket up against the back of the cab. The X-TEND™ is intended for use with tracker bars that have a ¾” diameter and is meant to be installed where the nylon support bracket can rest up against a solid metal portion on the back of the cab.* The mounting bracket and support bracket are made of non-corrosive materials and the metal tubing and eye hook are constructed of stainless steel for durability and corrosion resistance. Soft cushion foam gasket padding on the back of the nylon support bracket prevents damage to the back of the cab.

*Can be used on tractors with a solid metal back or windows with a metal frame down the center of the back of the cab. NOT for use with tractors that have solid, one-piece back windows.

Click HERE for more product information.