New Product: QWIK-CHECK™

02/26/2018


With a quick check, the QWIK-CHECK™ confirms there is a connection between the tractor and trailer. Designed for integration into the electrical system at the nosebox, the QWIK-CHECK™ eliminates the immediate need for a continuity tester. With the tractor turned on, and power supplied from the tractor to the trailer 7-way connection, the color coded LED lights on the QWIK-CHECK™ will light up as each circuit receives power. Each light is an indication that power on that correlating circuit is reaching the trailer 7-way connection.* If the correlating LED does not light up, it indicates there is a problem with the circuit, and the connection between the tractor and trailer should be further investigated.


The QWIK-CHECK™ is currently offered for universal installation on any nosebox, or as a readily available replacement for units already installed on the i-BOX™ or VOLT-BOX™ noseboxes. The universal unit comes with 12 inch blunt cut wires and ring terminals to customize installation. The replacement units come with wires pre-cut to length, and ring terminals already installed.

*Important Note: This product does NOT eliminate the need to perform a pre-trip inspection. It only confirms an electrical signal from the tractor to the trailer. It does NOT check the lighting and wires on the trailer. Additionally, it does not confirm if there is significant voltage to power a circuit. It is an indication of continuity only.



Contact your sales representative for more information and possible discounts.

Click the links below for more product information:
QWIK-CHECK™